General Mettle Request a quote
How it works

Here is what happens after you send us a part.

We design it, test it on a computer and make it, and you deal with the same people the whole way through.

  1. 01You send us what you have
  2. 02We test it before anyone cuts metal
  3. 03We make it in our own plant
01

You send us what you have

A drawing is great, and a rough idea is fine too.

If you have a STEP file, Nebula reads it within minutes and an engineer checks its work. If all you know is the load and the space it has to fit, we will draw the part with you.

A preview of the Nebula console. A weld-neck flange measured at 10.143 kg from its STEP file, a budget estimate of 38 to 93 dollars a part, and a stress check showing a highest stress of 44 MPa at 51 bar.

A preview of the Nebula console. You get a budget price and a list of open questions, usually within a working day.

02

We test it before anyone cuts metal

A mistake on a screen costs nothing.

We load the part the way it will be loaded in service and look for where it is weak. This flange saw its full rated pressure, and the stress stayed at about a sixth of what the steel can take.

Stress analysis is working today. Forging simulation is being added.

03

We make it in our own plant

One team answers for the whole part.

Our Pittsburgh plant is designed to forge, heat treat, machine and inspect under one roof. We are aiming to forge our first parts in May 2027, and casting follows in August 2027.

From billet to forging.

A render of the plant we are building.

The parts we are built for

If you reorder it by the hundreds, it is probably ours.

Our first line is sized for steel forgings up to 20 kg, in repeat lots from a few hundred to a few thousand.

  • Valve makers

    • Valve bodies
    • Bonnets
  • Pressure equipment and piping makers

    • Flanges
    • Tees and elbows
    • Couplings
  • Hydraulic cylinder makers

    • Rod-end eyes
    • Clevis mounts
    • Trunnions
  • Robotics and automation makers

    • Lifting clevises
    • Links and levers
    • Mounts
  • Ground-support equipment makers

    • Yokes
    • Connectors
    • Towing hardware
  • Farm and construction equipment makers

    • Yokes and links
    • Pins
    • Tines
  • Industrial machinery makers

    • Shafts and hubs
    • Gear blanks
    • Brackets and housings
  • Defense and heavy-vehicle makers

    • Links and pins
    • Control arms
    • Mounts
  • Transformer and switchgear makers

    • Oil-system components
    • Terminal hardware
Materials
Carbon, alloy and stainless steelsA105, 4140, F11, F22, F91 and F316 among the first grades
Tooling
An insert in a shared holderKept on our shelf for your reorders
Documentation
Inspection and traceabilityTo the requirements agreed per order

Send us a part and see what comes back.

It costs nothing to ask, and we reply within one working day.